Whether it’s in the water we drink, the medicines we take, or the electricity we use to read blog posts on the internet, Industrial Control Systems (ICS) are part of our daily lives.
There’s so much that relies on these systems, you’d like to assume they’re engineered and tested to guard against cyberattacks. You’d be wrong. Why aren’t our systems prepared for attacks? This is a tricky question. The systems running our critical infrastructure contain equipment 20+ years old. It’s not uncommon to see equipment 50+ years old which would require a full system revamp due to dependencies, and can easily cost millions.
Read more…
Source: Rapid7
Sign up for the Cyber Security Review Newsletter
The latest cyber security news and insights delivered right to your inbox
Related:
- Practical example of fuzzing OPC UA applications
October 19, 2020
In an article published in May 2018, Kaspersky ICS-CERT described their approaches to searching for vulnerabilities in industrial systems based on the OPC UA protocol. Two years later, the issue of ensuring the security of industrial systems based on that protocol is as relevant as ever. Large vendors of industrial software continue to develop and support ...
- MontysThree: Industrial espionage with steganography and a Russian accent on both sides
October 8, 2020
In summer 2020 we uncovered a previously unknown multi-module C++ toolset used in highly targeted industrial espionage attacks dating back to 2018. Initially the reason for our interest in this malware was its rarity, the obviously targeted nature of the campaign and the fact that there are no obvious similarities with already known campaigns at ...
- Threat landscape for industrial automation systems. H1 2020
September 24, 2020
Beginning in H2 2019 we have observed a tendency for decreases in the percentages of attacked computers, both in the ICS and in the corporate and personal environments. In H1 2020 the percentage of ICS computers on which malicious objects were blocked has decreased by 6.6 percentage points to 32.6%. The number was highest in Algeria (58.1%), ...
- Critical Industrial Flaws Pose Patching Headache For Manufacturers
September 23, 2020
While patch management already presents challenges for enterprises, it’s even more of a headache for manufacturers and other industrial firms – who may even need to shut down entire factory operations in order to apply fixes. Sharon Brizinov, the principal vulnerability researcher with Claroty, has discovered and reported various security flaws in industrial control systems (ICS), ...
- A Blind Spot in ICS Security: The Protocol Gateway [Part 3] What ICS Security Administrators can Do
September 23, 2020
A protocol gateway is a small network device, also called a “protocol converter” or “IoT gateway.” It is similar to an “interpreter” in the digital word, and acts as a communications intermediary between different protocols. As the integration of networks accelerates with IoT, protocol conversion grows increasingly important. However, the security of protocol gateways has ...
- The State of Industrial Cybersecurity 2020
September 15, 2020
In 2020 ARC Advisory Group on behalf of Kaspersky conducted a survey on the state of industrial cybersecurity, as well as the current priorities and challenges of industrial organizations. More than 330 industrial companies and organizations across the globe were surveyed online and 10 industry representatives were interviewed at trade fairs and ARC forums worldwide. This ...